Copper Y-Joint

Basically, it is a precision fitting which divides a single refrigerant line into two or more divisions, which allows a single outdoor unit to feed multiple indoor units. It harmonizes the flow, slices resistance and ensures the system has efficiency in all regions.

With over a decade of experience specializing in VRF joints, 227 Enterprise designs Y-joints using a universal multi-step configuration that accommodates most standard pipe sizes. This reduces the need to stock multiple parts. Each joint is pressure tested up to 5.2 MPa to ensure leak-free performance and reliable compatibility across the majority of VRF/VRV systems.

We manufacture Copper Y-Joints in a wide range of sizes, from ¼ inch (6.35 mm OD) up to 1¾ inch (54.0 mm ID). Both equal and mixed size combinations are available, allowing coverage for virtually all commercial and industrial VRF/VRV applications.

Yes. Our DA Series Y-Joints are engineered for universal OEM compatibility. The multi-step design allows a single kit to accommodate multiple pipe sizes, reducing inventory needs and ensuring easy, direct installation across most standard VRF/VRV systems.

The joints are all tested with a 5.2Mpa stress (approximately 754 psi) to ensure that it is leak-proof in the field. That is better than the normal standard that provides you with additional safety and trustworthiness of high-pressure R410A and additional refrigerants.

Our welding and copper (such as JISH 3300H) are precisely welded and each joint is tested separately at 5.2 Mpa. This two-step procedure ensures that there are no leaks, hence it makes the system to remain efficient and it will not lose any refrigerant.

Yes! We will custom-make one for any unusual size or configuration. In addition to this, we are selling Y-joints that are already lined with XLPE, NBR, or insulation that is fire-grade to prevent condensation, increase thermal effectiveness, and keep safety up to par.

On the more common sizes, we deliver within 710 working days. Custom or big orders could last 2-3 weeks. We maintain a good inventory in place, hence high-priority projects are marked off within a short time.

Certainly. 227 Enterprise is a valid exporter, supplying Y-joints to the HVAC contractors, MEP counsellors as well as integrators across the Middle East, Southeast Asia, Africa, Europe and Americans. We do all the paperwork and freighting headache.

All you need to do is to give us a call at sales at 227enterprise.com or submit a form on our site. Send in your project requirements, the quantity required, and any changes implemented and we will respond with a friendly quote, the data sheets and the assistance that you require.